Demineralisation of heating water prevents hardening deposits in the heating system, while also having a positive effect on its corrosion behavior. However, unfavorable changes in pH can occur after the demineralisation installation, especially if the pH should only be within a narrow range, as with aluminum materials (8.2 - 8.5).
Water is one of the best heat transfer mediums, which is why we use it in heating and cooling systems. However, water is also known as the universal solvent, because it is capable of dissolving more substances than any other liquid.
Some of these dissolved substances can cause issues within heating and cooling systems. These issues can very easily reduce the efficiency of the system, and increase the running and maintenance costs.
SpiroPure solutions remove these unwanted substances from the water, therefore allowing the heating or cooling systems to run efficiently and effectively.
With SpiroPure, the system water quality meets all requirements to improve efficiency and reduce the maintenance cost of the system.
Filling, refilling or mobile cleaning stations condition the system water through demineralisation, and also stabilise the pH level.
At the heart of the SpiroPure solutions, are the resin beads. These resins remove the salts and minerals from the water, this is called demineralisation. Demineralisation of system water not only effectively prevents hardening deposits in the heating system, but also has a positive effect on its corrosion behaviour.
However, it is often underestimated that unfavorable changes in pH can occur after commissioning the installation, especially if the pH should only be within a narrow range, as with aluminum materials.
All Spirotech fill and refill systems use a special mixed bed resin that not only removes the residual hardness and dissolved salts from the system water, resulting in a lower conductivity, but it also stablilises the pH value for a longer period.
SpiroPure does all that in a user-friendly and quick manner. It can be used in large as well as small installations. The filling and cleaning system is available both in a mobile and in a fixed version and can be applied to all heating and cooling systems.
