SpiroVent Steel microbubble deaerators
SpiroVent steel microbubble deaerators for connection diameters starting from DN 50.
Microbubble Deaerators
A SpiroVent deaerator should always be installed at the hottest point within a system. In the case of a heating system, for example, this is the point where thewater exits the boiler. In the case of acooling system, it is in the return beforethe chiller unit. When installed in thecorrect location a SpiroVent has thecapability to deaerate the entire system asit can make the water absorptive.
Industry-leading 5 year guarantee
Reduction of maintenance and malfunction
Energy saving
Reliable, leak-free venting system
Benefits
- Removes all circulating air and micro bubbles effectively.
- Removes trapped air when installed at the correct location.
- Greatly reduces the need for manual venting.
- Constant low pressure drop.
- No unnecessary shutdown.
- Connection diameters from ¾” to DN600 and above.
- A complete range, suitable for various pressures and temperatures.
- Exceptional guarantee.
Photos
Standard - Spirovent Steel Solutions
Max. operating pressure up to 10 bar • Fluid temperature up to 110°C • Nominal flow velocity up to 1.5 m/s. • L=Weld ends, F=Flanged, M=Magnet| Article Number |
|---|
| BA050L |
| BA050F |
| BA065L |
| BA065F |
| BA080L |
| BA080F |
| BA100L |
| BA100F |
| BA125L |
| BA125F |
| BA150L |
| BA150F |
| BA200L |
| BA200F |
| BA250L |
| BA250F |
| BA300L |
| BA300F |
+ DELIVERY TIME: ≤ 2 pc: up to 3 days, > 2 pc: up to 5 days
++ DELIVERY TIME: ≤ 2 pc: up to 10 days, > 2 pc: up to 15 days
Special - SpiroVent Steel Solutions
Max. operating pressure up to 10 bar • Fluid temperature up to 110°C • Nominal fl ow velocity up to 3 m/s. • L=Weld ends, F=Flanged, M=Magnet| Article Number |
|---|
| HA050L |
| HA050F |
| HA065L |
| HA065F |
| HA080L |
| HA080F |
| HA100L |
| HA100F |
| HA125L |
| HA125F |
| HA150L |
| HA150F |
| HA200L |
| HA200F |
| HA250L |
| HA250F |
| HA300L |
| HA300F |
| DN [mm] | OD [mm] | H [mm] | h [mm] | D [mm] | L [mm] |
Nom. flow rate [m³/h] | Presure nom. flow [kPa] | Volume [ltr] | Weight [kg] | Delivery |
|---|---|---|---|---|---|---|---|---|---|---|
| 50 | 60.3 | 630 | 120 | 159 | 260 | 25 | n/a | 7 | 12 | + |
| 50 | 60.3 | 630 | 120 | 159 | 350 | 25 | n/a | 7 | 17 | + |
| 65 | 76.1 | 630 | 130 | 159 | 260 | 40 | n/a | 7 | 12 | + |
| 65 | 76.1 | 630 | 130 | 159 | 350 | 40 | n/a | 7 | 19 | + |
| 80 | 88.9 | 780 | 150 | 219 | 370 | 54 | n/a | 25 | 24 | + |
| 80 | 88.9 | 780 | 150 | 219 | 470 | 54 | n/a | 25 | 32 | + |
| 100 | 114.3 | 780 | 160 | 219 | 370 | 94 | n/a | 25 | 24 | + |
| 100 | 114.3 | 780 | 160 | 219 | 475 | 94 | n/a | 25 | 33 | ++ |
| 125 | 139.7 | 1030 | 195 | 324 | 525 | 144 | n/a | 75 | 59 | ++ |
| 125 | 139.7 | 1030 | 195 | 324 | 635 | 144 | n/a | 75 | 71 | ++ |
| 150 | 168.3 | 1030 | 210 | 324 | 525 | 215 | n/a | 75 | 59 | ++ |
| 150 | 168.3 | 1030 | 210 | 324 | 635 | 215 | n/a | 75 | 74 | ++ |
| 200 | 219.1 | 1340 | 290 | 406 | 650 | 360 | n/a | 150 | 115 | ++ |
| 200 | 219.1 | 1340 | 290 | 406 | 775 | 360 | n/a | 150 | 137 | ++ |
| 250 | 273.0 | 1750 | 385 | 508 | 750 | 575 | n/a | 300 | 177 | ++ |
| 250 | 273.0 | 1750 | 385 | 508 | 890 | 575 | n/a | 300 | 212 | ++ |
| 300 | 323.9 | 2060 | 450 | 610 | 850 | 810 | n/a | 500 | 342 | ++ |
| 300 | 323.9 | 2060 | 450 | 610 | 1005 | 810 | n/a | 500 | 392 | ++ |
+ DELIVERY TIME: ≤ 2 pc: up to 3 days, > 2 pc: up to 5 days
++ DELIVERY TIME: ≤ 2 pc: up to 10 days, > 2 pc: up to 15 days
Custom - SpiroVent Steel solutions
L=Weld ends, F=Flanged, M=MagnetNext to the SpiroVent models (Brass or Steel) mentioned on these pages, a wide variety is available for different temperatures and pressures. In case you cannot find the right one for you, we are happy to discuss a custom solution for your needs. Specifications and prices on request.